Load Cell 100 kg
৳ 7,500
Product details of 50Kg Pressure Sensor Parallel Beam Load Cell Sensor Weighting Scale Sensor with Shielding Cable 0.02 Load Cell Sensor –
- Rated Load (kg): 50kg
- Precision: 0.02;
- Dimensions: 130mm x 30mm x 22mm
- Marterial: Aluminium Alloy
- Waterproof grade: IP65
- Insulation Resistance(M惟)鈮?000
- Excitation Voltage(V):10~15
- Compensated temp.Range(鈩?:-10鈥?40;
Aluminium Alloy Waterproof 50KG Precision 0.02 Load Cell Sensor Scale With Cable
Rated Load (kg): 50kg;
Precision: 0.02;
Dimensions: 130mm x 30mm x 22mm
Marterial: Aluminium Alloy
Waterproof grade: IP65Parameter锛?br /> Insulation Resistance(M惟)鈮?000
Excitation Voltage(V):10~15
Compensated temp.Range(鈩?:-10鈥?40;
Operating Temp.Range(鈩?:-35鈥?80
Safe Overload(%):150
Ultimate Overload(%):200
Wiring Schematic Diagram:
Red: + (input);
White: – (output);
Black: – (input);
Green: + (output).
Package included:
1 x Pressure Sensor
Related products
-
Load Cell 500 kg
৳ 10,000Add to cartNOTE:
in order add the life of the sensor to prevent damage caused by being overweight .
as usual ,200KG sensor only can use for 100kg scale only delivery 200kgTechnical parameters
Comprehensive error : 0.02% F.S
Sensitivity :1.0 0.1mv / v
Nonlinearity: 0.02% F.S
Hysteresis: 0.02% F.S
Importance of :0.02% F.S
Creep: 0.02% F.S/10min
0:00 Output :2% F.S
Input Impedance :405 10
Output impedance :350 3
Insulation resistance :5000M (100VDC)
Excitation voltage :5VDC ~ 12VDC
Temperature compensation range :10 ~ +40
Operating temperature range: -20 ~ +60
Temperature effect on zero 0.03% F.S/10
Temmp.effect 0.02% F.S/10
Safe overload 120%
Max Overload 150%
Protection class IP65Wiring
Black Power + , white Power – Red Signal + green signal –Use Special Note:
The sensor is a precision parts, severe vibration , fall , collision ,
overload , overvoltage , etc. , are very likely to cause permanent damage to the sensor or
affect the accuracy and linearity , if you do not necessarily understand the parts ,
please buy carefully . After all, the resistance and capacitance transistors and other components
compared to other electronic components to be more fragile .Resistance strain gauge pressure sensorMainly by the elastic body ,
the resistance strain gauge cable and other components ,
the internal circuit using Huygens bridge, when the elastic body is deformed under load ,
Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation ,
its resistance will change ( increase or decrease ) , so that the bridge out of balance ,
a corresponding differential signal for subsequent measurement circuit and handling. -
Load Cell 200 kg
৳ 9,000Add to cartNOTE:
in order add the life of the sensor to prevent damage caused by being overweight .
as usual ,200KG sensor only can use for 100kg scale only delivery 200kgTechnical parameters
Comprehensive error : 0.02% F.S
Sensitivity :1.0 0.1mv / v
Nonlinearity: 0.02% F.S
Hysteresis: 0.02% F.S
Importance of :0.02% F.S
Creep: 0.02% F.S/10min
0:00 Output :2% F.S
Input Impedance :405 10
Output impedance :350 3
Insulation resistance :5000M (100VDC)
Excitation voltage :5VDC ~ 12VDC
Temperature compensation range :10 ~ +40
Operating temperature range: -20 ~ +60
Temperature effect on zero 0.03% F.S/10
Temmp.effect 0.02% F.S/10
Safe overload 120%
Max Overload 150%
Protection class IP65Wiring
Black Power + , white Power – Red Signal + green signal –Use Special Note:
The sensor is a precision parts, severe vibration , fall , collision ,
overload , overvoltage , etc. , are very likely to cause permanent damage to the sensor or
affect the accuracy and linearity , if you do not necessarily understand the parts ,
please buy carefully . After all, the resistance and capacitance transistors and other components
compared to other electronic components to be more fragile .Resistance strain gauge pressure sensorMainly by the elastic body ,
the resistance strain gauge cable and other components ,
the internal circuit using Huygens bridge, when the elastic body is deformed under load ,
Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation ,
its resistance will change ( increase or decrease ) , so that the bridge out of balance ,
a corresponding differential signal for subsequent measurement circuit and handling.
Site Visitor (ভিজিটর)
Users Today : 21
Users Yesterday : 0
This Month : 21
This Year : 21
Total Users : 65468
Views Today : 35
Total views : 655670
Who's Online : 1
Reviews
There are no reviews yet.