Category: LOAD CELL

Showing all 4 results

Load Cell 100 kg
৳ 7,500
Product details of 50Kg Pressure Sensor Parallel Beam Load Cell Sensor Weighting Scale Sensor with Shielding Cable 0.02 Load Cell Sensor –

Rated Load (kg): 50kg

Precision: 0.02;

Dimensions: 130mm x 30mm x 22mm

Marterial: Aluminium Alloy

Waterproof grade: IP65

Insulation Resistance(M惟)鈮?000

Excitation Voltage(V):10~15

Compensated temp.Range(鈩?:-10鈥?40;

Aluminium Alloy Waterproof 50KG Precision 0.02 Load Cell Sensor Scale With Cable

Specification:Model:
Rated Load (kg): 50kg;
Precision: 0.02;
Dimensions: 130mm x 30mm x 22mm
Marterial: Aluminium Alloy
Waterproof grade: IP65Parameter锛?br /> Insulation Resistance(M惟)鈮?000
Excitation Voltage(V):10~15
Compensated temp.Range(鈩?:-10鈥?40;
Operating Temp.Range(鈩?:-35鈥?80
Safe Overload(%):150
Ultimate Overload(%):200
Wiring Schematic Diagram:
Red: + (input);
White: – (output);
Black: – (input);
Green: + (output).

Package included:
1 x Pressure Sensor
Add to cart
Load Cell 200 kg
৳ 9,000

NOTE:
in order add the life of the sensor to prevent damage caused by being overweight .
as usual ,200KG sensor only can use for 100kg scale only delivery 200kg

Technical parameters
Comprehensive error : 0.02% F.S
Sensitivity :1.0 0.1mv / v
Nonlinearity: 0.02% F.S
Hysteresis: 0.02% F.S
Importance of :0.02% F.S
Creep: 0.02% F.S/10min
0:00 Output :2% F.S
Input Impedance :405 10
Output impedance :350 3
Insulation resistance :5000M (100VDC)
Excitation voltage :5VDC ~ 12VDC
Temperature compensation range :10 ~ +40
Operating temperature range: -20 ~ +60
Temperature effect on zero 0.03% F.S/10
Temmp.effect 0.02% F.S/10
Safe overload 120%
Max Overload 150%
Protection class IP65

Wiring
Black Power + , white Power – Red Signal + green signal –

Use Special Note:
The sensor is a precision parts, severe vibration , fall , collision ,
overload , overvoltage , etc. , are very likely to cause permanent damage to the sensor or
affect the accuracy and linearity , if you do not necessarily understand the parts ,
please buy carefully . After all, the resistance and capacitance transistors and other components
compared to other electronic components to be more fragile .

Resistance strain gauge pressure sensorMainly by the elastic body ,
the resistance strain gauge cable and other components ,
the internal circuit using Huygens bridge, when the elastic body is deformed under load ,
Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation ,
its resistance will change ( increase or decrease ) , so that the bridge out of balance ,
a corresponding differential signal for subsequent measurement circuit and handling.

Add to cart
Load Cell 500 kg
৳ 10,000

NOTE:
in order add the life of the sensor to prevent damage caused by being overweight .
as usual ,200KG sensor only can use for 100kg scale only delivery 200kg

Technical parameters
Comprehensive error : 0.02% F.S
Sensitivity :1.0 0.1mv / v
Nonlinearity: 0.02% F.S
Hysteresis: 0.02% F.S
Importance of :0.02% F.S
Creep: 0.02% F.S/10min
0:00 Output :2% F.S
Input Impedance :405 10
Output impedance :350 3
Insulation resistance :5000M (100VDC)
Excitation voltage :5VDC ~ 12VDC
Temperature compensation range :10 ~ +40
Operating temperature range: -20 ~ +60
Temperature effect on zero 0.03% F.S/10
Temmp.effect 0.02% F.S/10
Safe overload 120%
Max Overload 150%
Protection class IP65

Wiring
Black Power + , white Power – Red Signal + green signal –

Use Special Note:
The sensor is a precision parts, severe vibration , fall , collision ,
overload , overvoltage , etc. , are very likely to cause permanent damage to the sensor or
affect the accuracy and linearity , if you do not necessarily understand the parts ,
please buy carefully . After all, the resistance and capacitance transistors and other components
compared to other electronic components to be more fragile .

Resistance strain gauge pressure sensorMainly by the elastic body ,
the resistance strain gauge cable and other components ,
the internal circuit using Huygens bridge, when the elastic body is deformed under load ,
Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation ,
its resistance will change ( increase or decrease ) , so that the bridge out of balance ,
a corresponding differential signal for subsequent measurement circuit and handling.

Add to cart
Load Cell Transmitter 4-20mA/ 0-10 VDC / RS485 /RS232 – 8 Load Cell Supported Capacity 99999.9 Kg

Call For Price :- +8801626 41 4477 Whats App
Key Features:
High Precision: With an accuracy grade of III and static weighing/force measuring accuracy between 0.2%–0.5%, it ensures dependable and consistent readings.

Advanced Hardware:

32-bit ARM CPU (48MHz) for fast, efficient data processing.

24-bit ∑-△ADC with 1/1,000,000 internal resolution.

High sampling frequency of 640Hz for real-time responsiveness.

Anti-Vibration Filtering: Equipped with an optional special digital filtering algorithm for enhanced stability in high-vibration applications.

Flexible Input Signals:

Accepts mV, V, and mA signals, ideal for various load cells or force transducers.

Supports a wide input range:

0~19.5mV

02.5V / 05V / 0~10V

0~20mA

Compact Design with LED Display:

5 Red LED digital tubes for real-time weight or force readout.

IP65-rated front panel protects against dust and moisture.

Control & Communication:
DO Alarm Modes:

Weight/Force Limit, Increment, Decrement, and Section Output Modes.

Signal Output & Monitoring:

Analog Output (AO): 0~20mA, 0.05%FS.

Digital Outputs (DO): 2 relays, AC250V/DC24V, 1A.

Connectivity:

COM1 (RS232) & COM2 (RS485) ports for integration.

Supports Modbus protocol for easy connection to host IPCs and remote displays.

Ideal Applications:
Mini Crane Overload Protection Systems

Tension Measurement & Monitoring

Peak Force Detection and Holding

Alarm-triggered Load Management

Weighing/Force Totalizing & Control Systems

Technical Specifications:
Power Supply: DC24V±20% with reverse polarity protection.

Load Cell Support: Connect up to 8 load cells (350Ω).

Transmitter Excitation: DC12V/100mA.

Operating Temperature: -25℃ to +45℃.

Mounting Dimensions:

Panel Cut-Out: 94 × 47 mm

Outline Size: 107 × 60 × 100 mm

If you need a durable, intelligent, and space-saving controller for your crane or industrial force monitoring setup, This the perfect choice.

Contact Loadcell.ae today to integrate this high-performance controller into your system!

Read more